Administrator's Guide

3. Extend the hard drive drawer (3).
4. Locate the failed hard drive.
NOTE: The initial indicator LED on the failed drive is amber. Use the hard drive bay labels
to help identify the failed drive.
5. To remove the failed hard drive:
1. Press the release button (1).
2. Pull the release lever (2).
3. Remove the hard drive (3).
Replacing the drive drawer hard drive
IMPORTANT: You must be prepared to reboot the storage solution after completing this procedure.
To replace the drive drawer hard drive:
1. Install the hard drive:
1. Insert the replacement hard drive with the lever in the open position (1).
2. Push the release lever into place (2).
Removing and replacing the drive drawer hard drive 125