Administrator's Guide

3. Extend the hard drive drawer (3).
3. Label the hard drives.
NOTE: Use the drive labels provided with the replacement front bezel (full) to label the hard
drives to ensure you replace the drives in the correct order.
4. Remove all hard drives.
IMPORTANT: Install the hard drives in the same slots from which you removed them or the
system might fail.
5. Push the drive drawer back into the messaging system enclosure.
6. Label each server blade and then remove both server blades.
7. Unplug all cables from the back of the messaging system enclosure.
Removing and replacing the front bezel (full) 109