Administrator's Guide

6. Label each server blade, and then remove both server blades.
7. Label and then unplug all cables from the back of the messaging system enclosure.
8. Unscrew the retaining screws from the bezel ears, and then remove the enclosure from the
rack.
WARNING! The messaging system enclosure is heavy, even after removing the hard drives.
Always use at least two people to remove the messaging system from the rack.
9. Remove the top back panel by pressing the release button and lifting the latch to slide the top
back panel off.
10. Remove the server blade airflow baffle from inside the enclosure.
Replacing the server airflow baffle
To replace the server airflow baffle:
1. Install the replacement server blade airflow baffle.
2. Reinstall the top back panel.
3. Place the enclosure back in the rack, and tighten the two retaining screws.
WARNING! The messaging system enclosure is heavy, even after removing the hard drives.
Always use at least two people to replace the messaging system in the rack.
4. Replace the server blades into their original bays.
5. Extend the hard drive drawer:
Removing and replacing the server airflow baffle 105