Administrator's Guide

20. Loosen the two thumbscrews holding the midplane board in place (1), pull the capacitive
locking pin out of the midplane board (2), and then lift the midplane board out of the enclosure
(3).
21. Remove the small baffle from beside the server blade backplane by pinching the tabs and
lifting the small baffle out of the enclosure.
22. Remove the large baffle from the bottom of the enclosure.
23. Unplug the power cable from the server backplane by pinching the plug release mechanism
(1), remove the screw (2), and then remove the server blade backplane from the enclosure
(3).
Replacing the server blade backplane
To replace the server blade backplane:
Removing and replacing the server blade backplane 101