Administrator's Guide

8. Complete the following (Figure 81 (page 91)):
a. Unplug the power cable from the server blade backplane by pinching the plug release
mechanism (1).
b. Remove the screw (2).
c. Remove the server blade backplane from the enclosure (3).
Figure 81 Removing the server blade backplane
Replacing the server blade backplane
1. Complete the following (Figure 82 (page 91)):
a. Install the replacement server blade backplane (1).
b. Replace the screw (2).
c. Plug in the power cable (3).
Figure 82 Installing the server blade backplane
2. Replace the large baffle on the bottom of the enclosure.
3. Replace the small baffle beside the server blade backplane.
Removing and replacing the server blade backplane 91