Administrator's Guide

Manager. A dedicated server is recommended to host both HP Systems Insight Manager and
HP Insight Remote Support Advanced.
To implement Insight Remote Support for E5000 systems, follow the instructions in release A.05.50
or later of the following guides:
• HP Insight Remote Support Quick Installation Guide (for standard and advanced support)
• HP Insight Remote Support Standard Hosting Device Configuration Guide (for standard support)
• HP Insight Remote Support Advanced CMS Configuration and Usage Guide (for advanced
support)
• HP Insight Remote Support Standard Managed Systems Configuration Guide (for standard
support).
For Insight Remote Support Standard documentation, go to:
http://www.hp.com/go/insightremotestandard-docs
For Insight Remote Support Advanced documentation, go to:
http://www.hp.com/go/insightremoteadvanced-docs
Be aware of the following specifics for E5000 systems:
• The messaging system is a "managed system" as described in Insight Remote Support guides.
• The E5460sb is equivalent to a ProLiant server and meets all the requirements for a managed
system.
Follow guidelines and procedures for Windows ProLiant servers in the Insight Remote Support
documentation.
• The messaging system hardware is preconfigured for Insight Remote Support and uses the
WMI (WBEM) provider.
• Register the system using the E5000 product number and serial number, instead of the blade
serial number and part number.
Confirm and overwrite any prepopulated values with the serial number of the messaging
system. The product number and serial number are located on the tear-away label at the EMU
on the back of the messaging system, see Figure 47 (page 60).
• You must to register WBEM access credentials in HP SIM for Insight Remote Support Advanced.
Microsoft Systems Center Operations Manager
Microsoft Systems Center Operations Manager (SCOM) provides comprehensive monitoring,
performance management, and analysis tools to maintain Windows OS and application platforms.
This solution allows you to monitor Microsoft Windows environments and HP storage products
through a common OpsMgr console. To download HP management packs for Microsoft System
Center Operations Manager, including installation, configuration, and usage documentation, visit
the HP Management Packs for Microsoft Systems Center site at:
www.hp.com/go/storageworks/scom2007
HP 1210m Volume Online Tool
Use the HP 1210m Volume Tool to manually set all volumes online. Manually setting volumes online
may be necessary if a disk enclosure is powered down before the server blades are powered
down and the enclosure contains disks with LUNs on them.
IMPORTANT: You should only use this tool under the guidance of HP Support to avoid potential
data loss.
The tool is included (but not installed) with HP E5000 software version 2.01.1b or later.
Microsoft Systems Center Operations Manager 59