Administrator's Guide

Table 2 Server blade LEDs status (continued)
StatusDescriptionItem
OFF = No remote management
Green = NormalHealth LED2
Flashing = Booting
Amber = Degraded condition
Red = Critical condition
Green = Network linkedNIC 1 LED*3
Green flashing = Network activity
OFF = No link or activity
Green = Network linkedFlex-10 NIC 2 LED*4
Green flashing = Network activity
OFF = No link or activity
—Reserved5
Green = OnSystem power LED6
Amber = Standby (auxiliary power available)
OFF = OFF
*Actual NIC numbers depend on several factors, including the operating system installed on the server blade.
Figure 34 Front LED display board
Table 3 Front LED status
StatusDescriptionItem
Green = The drive is online, but is not currently active.Hard drive LEDs1
Flashing irregularly green = The drive is online and it is operating normally.Normal mode (UID LED is
solid)
Flashing green (1 Hz) = Do not remove the drive. Removing the drive may
terminate the current operation and cause data loss. The drive is rebuilding,
or it is part of an array that is undergoing expansion, logical drive extension,
a stripe size migration, or RAID migration.
Flashing amber/green = Drive is configured and indicating a predictive
failure. The drive may also be undergoing a rebuild, expansion, extension,
or migration.
48 Monitoring and troubleshooting the messaging system