Administrator's Guide

Table 1 (page 43) shows the description for the messaging system status tray check mark color.
Table 1 System status tray description
DescriptionIcon check mark color
The system is running a supported configuration.Green
The system is running an unsupported configuration. The system tray icon shows a red
error symbol until Microsoft Exchange has been fully installed, or if the system is running
Red
outside the terms of the service and support agreement (for example, the system is running
a server application other than Microsoft Exchange).
System Summary
The System Summary tab displays information such as the enclosure name, IP Address, firmware
revision, and serial number. The lower part of the System Summary also shows the status of hardware
and Microsoft Exchange, and whether your current firmware revision is up to date. If a green check
mark does not appear beside the configuration status, go to the related tab for information about
the issue.
Figure 28 System summary
Hardware Status
The Hardware Status tab provides the health status for each of the messaging system components.
The System section displays information for the server blade that you are logged in to. If a problem
is reported in the System section, you should check the Hardware Status tab on each server blade.
NOTE: If the System Manager shows that a LUN has an error, open the System Management
Homepage and determine whether the LUN is degraded due to a disk failure. If so, also use the
System Management Homepage to determine which disk needs to be replaced.
Using the System Manager 43