Administrator's Guide

Figure 15 Computer name
10. Review the summary report and complete the configuration. The Summary screen lists the
configuration settings you have made.
11. Click Apply Settings to apply the configuration settings or Back to modify them. When you
are ready to accept the settings, click Finish to reboot the server. If you do not want to reboot
at this time, clear the Reboot after exiting the wizard box. The server must be rebooted to join
the domain and is also a required step prior to deploying Microsoft Exchange Server 2010.
NOTE: The server blades contain redundant storage controllers. When a server reboots,
one of the controllers shuts down. The partner server sees this event as a redundancy loss and
creates a log entry: “drive array controllers are no longer redundant”. You can ignore the
message if it coincides with a reboot you initiated.
Continue with the next procedure, “Deploying Microsoft Exchange Server 2010” (page 26), and
complete the setup on the Bay 1 server before setting up the Bay 2 server.
Deploying Microsoft Exchange Server 2010
Follow this procedure to deploy Microsoft Exchange Server 2010. Complete the deployment of
Microsoft Exchange Server 2010 on the Bay 1 server blade before beginning the configuration
of the Bay 2 server blade.
26 Configuring the messaging system software