Administrator's Guide

ResolutionIssue
The disk LUNs/volumes are not set up correctly.
• Ensure that all disks are fully seated and run the E5000
Configuration Wizard again.
• Resolve any disk issues and run the E5000
Configuration Wizard again.
NOTE: It is normal for the hot plug drives to have their
LEDs off.
• If an expansion disk enclosure was not powered on:
◦ Power on that expansion disk enclosure.
◦ Run E5000 Configuration Wizard diagnostics.
◦ Follow the procedure for adding storage see
(“Adding expansion disk enclosures to an installed
messaging system” (page 21)).
• If an expansion disk enclosure was not cabled correctly:
◦ Resolve the cable issue.
◦ Run E5000 Configuration Wizard diagnostics.
◦ Follow the procedure for adding storage see
(“Adding expansion disk enclosures to an installed
messaging system” (page 21)).
• If you ordered multiple E5000 Messaging Systems and
multiple expansion disk enclosures ensure that you
attach the correct expansion disk enclosures to the
E5000. Each expansion disk enclosure has a label with
the serial number of a specific E5000.
Ignore this error. It is normal for the E5300 to have only
12 drives.
Drives 1-4 are missing or have failed (E5300).
Verify that:You cannot reach the EMU.
• The server blades and the EMU are on the same
network.
• The server blade and the enclosure network settings are
correct.
• The EMU card is present and in a healthy state.
• The network cables are connected properly.
The replication connection is lost.
• Ensure that the cabling for replication network is correct.
• Ensure that both replication ports are on the same
subnet.
Exchange Deployment Tool
ResolutionIssue
Purchase license keys from Microsoft. License keys are not
included with the E5000 Messaging System.
You do not have an Exchange 2010 license key.
Verify that the key is valid and was entered correctly.The Exchange 2010 license key you entered was returned
as being invalid.
Upgrade to an Enterprise Edition Exchange license from
Microsoft. The Enterprise Edition is required for six or more
databases.
The configuration fails when configuring the sixth database.
Exchange Deployment Tool 177