Administrator's Guide
Restrictions
• <bay#> must be 1 or 2.
• This command can only function if enclosure power is on. Because the EMU hardware cannot
determine if a blade is physically present unless enclosure power is on, the EM reports the
warning “Could not determine the IP address of the management processor for blade” if this
command is issued when power is off.
SHOW SYSLOG SETTINGS
Syntax
SHOW SYSLOG SETTINGS
Description
Displays the remote syslog settings (enabled/disabled status, IP address, Port#) for the Enclosure
Manager.
Restrictions
None
TEST SYSLOG
Syntax
TEST SYSLOG
Description
Tests the remote system log settings by logging a test message to the remote syslog. The test message
also appears in the local EM system log.
Restrictions
Only functions if remote syslog is enabled.
Session
Interacting with the EM via the CLI requires a login-initiated session. A session represents a transient
context which has a state that can be explicitly controlled by the user. This section describes
commands for managing session state and behavior.
CLEAR SCREEN
Syntax
CLEAR SCREEN
Description
Clears the terminal screen.
Restrictions
None
CONNECT SERVER
Syntax
CONNECT SERVER <bay#>
158 Managing the EMU