Administrator's Guide

Restrictions
The remote system log server address must be configured before enabling remote system logging.
SET REMOTE SYSLOG PORT
Syntax
SET REMOTE SYSLOG PORT <port>
Description
Sets the UDP destination port for remote system logging.
Restrictions
• The default remote system logging port is 514.
• <port> must be a number between 1 and 65535.
• Settings are not used unless remote system logging is enabled.
SET REMOTE SYSLOG SERVER
Syntax
SET REMOTE SYSLOG SERVER { <IPv4> | <dns name>}
Description
Sets the IP address of a remote system log server.
Restrictions
• EM 1.0 only supports IPv4.
• Settings are not used unless remote system logging is enabled.
SHOW SYSLOG EM
Syntax
SHOW SYSLOG EM
Description
Displays the local syslog for the Enclosure Manager.
Restrictions
None
SHOW SYSLOG SERVER
Syntax
SHOW SYSLOG SERVER <bay#>
Description
Displays the syslog for the specified server. If the session is not in script mode, the EM paged the
display of the output to throttle output and give the user time to view the data. iLO syslog data is
formatted in XML.
Forensic 157