Administrator's Guide

SET EM NAME
Syntax
SET EM NAME "<EM name>"
Description
Sets the user defined string reported with SHOW EM STATUS. The system responds with confirmation
of the change. The default EM name is “EM-<mac address>” where <mac-address> is the
hardware Ethernet address for the iLO port on the EMU. For example, EM-78E7D1C12074.
Restrictions
<EM name> must be 1 to 32 characters long and includes all alphanumeric, underscore (_) , and
hyphen (-) characters.
SET ENCLOSURE ASSET
Syntax
SET ENCLOSURE ASSET [TAG] "<asset tag>"
Description
Sets the enclosure asset tag that is stored persistently in the EM, displayed with SHOW ENCLOSURE
INFO command.
Restrictions
<asset tag> must be 1 to 32 characters long and includes all alphanumeric, underscore (_)
and hyphen (-) characters.
Restrictions
<id> is a decimal integer from 0 to 99.
SET ENCLOSURE NAME
Syntax
SET ENCLOSURE NAME "<enclosure name>"
Description
Sets the persistent enclosure name stored in the EM. This name is displayed with SHOW ENCLOSURE
INFO command. The default (unset by user) value is ‘UnnamedEnclosure’.
Restrictions
<enclosure name> must be 1 to 32 characters long and includes all alphanumeric, underscore
(_), and hyphen (-) characters.
SET ENCLOSURE UID
Syntax
SET ENCLOSURE UID { ON | OFF | SLOW | FAST }
Description
Sets the blue enclosure UID. The enclosure has a UID on both the front and rear of the enclosure.
However, the front UID is only lit when enclosure power is on, while the rear UID is only lit when
154 Managing the EMU