Administrator's Guide

SHOW SERVER LIST
Syntax
SHOW SERVER LIST
Description
Displays a brief iLO and status description of all server blades. For a longer description, use SHOW
SERVER INFO.
Restrictions
This command functions only if the enclosure power is already on. Because the EMU hardware
cannot determine if a blade is physically present unless enclosure power is on, the EM reports the
warning “enclosure power is off” if this command is issued when power is off.
SHOW SERVER NAMES
Syntax
SHOW SERVER NAMES
Description
Displays a brief description of all server blades.
Restrictions
This command functions only if the enclosure power is already on. If power is not on, the command
responds with the message: “enclosure power is off”. If power is coming on but state exchange
between iLO and EM have not normalized, some displayed information might display [Unknown]
or ?.
SHOW SERVER STATUS
Syntax
SHOW SERVER STATUS { ALL | <bay#>[ { , | - } <bay#>] }
Description
Displays current status of the server blade in the specified bay or both bays.
Restrictions
This command functions only if the enclosure power is already on. Because the EMU hardware
cannot determine if a blade is physically present unless enclosure power is on, the EM reports the
warning “enclosure power is off” if this command is issued when power is off.
Enclosure control
The commands in the section provide various enclosure control functions.
DOWNLOAD CONFIG
Syntax
DOWNLOAD CONFIG <URL>
152 Managing the EMU