Administrator's Guide

SET IPCONFIG STATIC
Syntax
SET IPCONFIG STATIC <ip address> <netmask> [<gateway>]
Description
Configures the IP settings for the EM to static mode. In selecting this mode, the IP address and
netmask are be set to <ip address> and <netmask>, respectively. These settings take effect
immediately. The gateway address will be cleared if it is omitted. Note that you can also set the
gateway address using the SET EM GATEWAY command.
Restrictions
None
SHOW NETWORK
Syntax
SHOW NETWORK
Description
Displays the network settings of the Enclosure Manager.
Restrictions
None
SHOW EBIPA
Syntax
SHOW EBIPA
Description
Displays EBIPA configuration information.
Restrictions
EM EBIPA control only functions for the two iLO processors in the server blades.
Server management
Use the commands in this section to perform server management operations.
POWEROFF SERVER
Syntax
POWEROFF SERVER { ALL | <bay#>[{ , | - } <bay#>]} [FORCE]
Description
Sends an asynchronous request for a graceful shutdown to the server. This command returns the
user to the CLI immediately but the shutdown command can take up to five minutes to complete. If
the FORCE option is specified, the server blade OS is not given the opportunity to perform a
graceful shutdown before power is removed. This option can cause a server blade to lose data
and possibly to become unstable.
Server management 149