Administrator's Guide

Restrictions
The enclosure must be powered on, otherwise, iLO has no power and cannot sense temperature
or send data to the EM.
Internet control
The following commands define the EM 1.0 or later CLI functions for Internet control.
ADD EBIPA
Syntax
ADD EBIPA { SERVER } DNS <ip address>
Description
Adds an EBIPA DNS server IP address to the list of DNS servers for server bays.
Restrictions
• A maximum of three DNS servers can be added for EBIPA.
• <ip address> must be in the form ###.###.###.###, where each ### ranges from 0 to
255.
REMOVE EBIPA
Syntax
REMOVE EBIPA { SERVER } DNS <ip address>
Description
Removes an EBIPA (Enclosure Bay IP Addressing) DNS server IP address from the list of DNS servers
for server bays.
Restrictions
<ip address> must be in the form ###.###.###.###, where each ### ranges from 0 to 255.
SET EBIPA
Syntax
SET EBIPA { SERVER } { NETMASK <netmask> | GATEWAY <gateway> | DOMAIN
"<domain name>"| <ip address> {<netmask> | [netmask] { ALL | <bay#> [{
, | - } <bay#>]} }
Description
Sets EBIPA settings, including starting IP address, net mask, default gateway, and domain name
for the specified bay. If a bay number is not specified when setting an IP address, then both server
bays are assigned an IP address in the range starting from the number entered for <ip address>.
The keyword NONE can be used in place of <ip address>, <netmask>, or <gateway> to
clear the IP address.
Internet control 147