Administrator's Guide

Table 15 Universal time zone settings (continued)
WSUGreenwichEtc/GMT+11Etc/GMT-6Etc/GMT+0
ZuluHSTEtc/GMT-12Etc/GMT+6Etc/GMT-1
METEtc/GMT+12Etc/GMT-7Etc/GMT+1
If you leave the time zone, century, or year blank, the current setting is reused.
Restrictions
• Date and time can only be set if NTP is disabled.
• MM is an integer from 01 to 12.
• DD is an integer from 01 to 31.
• hh is an integer from 00 to 23.
• mm is an integer from 00 to 59.
• CC is an integer from 00 to 99.
• YY is an integer from 00 to 99.
SET TIMEZONE
Syntax
SET TIMEZONE <timezone>
Description
Sets the time zone.
Restrictions
Only the choices listed in Table 15 (page 139) can be used.
SET NTP POLL
Syntax
SET NTP POLL <seconds>
Description
Sets the polling interval for NTP servers. The factory default polling interval is 720 seconds (12
minutes).
Restrictions
The polling range is 60 – 86400 seconds (1 minute to 1 day).
NOTE: EM 1.10 or later does not support this command.
SET NTP PRIMARY
Syntax
SET NTP PRIMARY <host>
Description
Sets the primary server used for synchronizing time/date using the Network Time Protocol (NTP).
<host> can be either an IPv4 address, an IPv6 address, or a DNS name.
140 Managing the EMU