Administrator's Guide

DISABLE NTP
Syntax
DISABLE NTP
Description
Disables the synchronizing of time and date with a remote server using the NTP protocol. Does
not clear any NTP servers that have been configured with SET NTP.
Restrictions
None
ENABLE NTP
Syntax
ENABLE NTP
Description
Enables NTP support for the Enclosure Manager.
Restrictions
None
SET DATE
Syntax
SET DATE MMDDhhmm
Description
Sets the enclosure date and time and, optionally, year and time zone. Time is in a 24-hour format.
If the year or time zone parameters are omitted, the current values remain in effect. The definitions
of the date parameters are:
MM: Month
DD: Day
hh: Hour (24–hour format)
mm: Minute
CC: Century
YY: Year
TZ: Time Zone (chosen from strings in Table 15 (page 139))
Table 15 Universal time zone settings
MSTEtc/GMT-13Etc/GMT+7Etc/GMT-2CET
MST7MDTEtc/GMT-14Etc/GMT+8Etc/GMT+2CST6CDT
NavajoEtc/GreenwichEtc/GMT+8Etc/GMT-3EET
PST8PDTEtc/UCTEtc/GMT-9Etc/GMT+3EST
UCTEtc/UniversalEtc/GMT+9Etc/GMT-4EST5EDT
UniversalEtc/UTCEtc/GMT-10Etc/GMT+4Etc/GMT
UTCEtc/ZuluEtc/GMT+10Etc/GMT-5Etc/GMT0
WETGMTEtc/GMT-11Etc/GMT+5Etc/GMT-0
Time functions 139