Administrator's Guide

SET PASSWORD
Syntax
SET PASSWORD ["<password>"]
Description
Sets the password of the user who entered the command. The <password> parameter is optional,
but failure to enter a password results in the system prompting you for a password.
• Passwords must be between 3 and 40 characters in length.
• Acceptable characters include any printable character.
• This command is not valid in script mode.
Restrictions
None
SET USER PASSWORD
Syntax
SET USER PASSWORD "<user name>"["<new password>"]
Description
Sets a user’s password. If you do not supply a password on the command line, you are prompted
to enter it.
Restrictions
• Only the Administrator account can modify the password of the Administrator account.
• The <user name> is case-sensitive.
• The <new password> must be 3 to 40 characters long.
• The character set includes all printable characters.
• This command is not valid in script mode.
SHOW USER
Syntax
SHOW USER [ [LIST | "<user name>"] ]
Description
Displays general user information and user rights (which is always “Admin”) for this firmware
version.
Restrictions
• Does not show information for restricted user accounts—only shows information for
Administrator and other end-user-created accounts.
• Since there are no bay or device access restrictions, no information about bays being assigned
is given.
Authentication 137