Administrator's Guide

• Management network
◦ The default setting is dynamic (DHCP) addressing, but you can change this setting as
needed.
◦ HP recommends that the management network be on the same network as the EMU and
iLO NIC port.
◦ This NIC is not standard on the E5300 model.
• Alternate network
◦ The default setting is dynamic (DHCP) addressing, but you can change this setting as
needed.
◦ This NIC is not standard on the E5300 model.
Figure 4 (page 12) shows the recommended E5300 network configuration expected by the E5000
Configuration Wizard described in “Configuring the messaging system software” (page 23).
Figure 4 Recommended E5300 network configuration
1. Client/MAPI network
2. Replication network cable
3. Domain controller
4. Connection to EMU
Figure 5 (page 13) shows the typical E5500/5700 network configuration expected by the E5000
Configuration Wizard, as described in “Configuring the messaging system software” (page 23).
12 Preparing to install the messaging system