Administrator's Guide

Figure 99 Removing the plug bracket from the coil power plug
10. Unplug the coil power assembly from the midplane board (Figure 100 (page 101)).
Figure 100 Unplugging the coil power assembly
11. Press the release mechanism on the side rail (1, Figure 101 (page 101)), and then pull the hard
drive drawer fully out of the enclosure (2).
WARNING! The hard drive drawer is heavy, even after removing the hard drives. Make
sure the drawer is fully supported as you remove it from the enclosure.
Figure 101 Removing the drive drawer
Removing and replacing a drive drawer 101