User Manual

Table A-1 EliteDisplay E190i Specifications (continued)

Measured Power Consumption:

Full Power

Typical Settings

Sleep

Switch Off

28.0 watts

26.0 watts

<0.5 watts

Input Terminal One VGA connector, one DVI connector,

and one DisplayPort connector (cables

included)

NOTE: For the latest specifications or additional specifications on this product, go to

http://www.hp.com/go/productbulletin/ and search for your specific display model to find the model-

specific QuickSpecs.

Recognizing Preset Display Resolutions

The display resolutions listed below are the most commonly used modes and are set as factory

defaults. This monitor automatically recognizes these preset modes and they will appear properly

sized and centered on the screen.

EliteDisplay E190i

Table A-2 Factory Preset Modes

Preset Pixel Format Horz Freq (kHz) Vert Freq (Hz)

1 640 × 480 31.469 59.94

2 720 × 400 31.469 70.087

3 800 × 600 37.879 60.317

4 1024 × 768 48.363 60.004

5 1280 × 1024 63.981 60.02

Entering User Modes

The video controller signal may occasionally call for a mode that is not preset if:

●

You are not using a standard graphics adapter.

●

You are not using a preset mode.

It this occurs, you may need to readjust the parameters of the monitor screen by using the on-screen

display. Your changes can be made to any or all of these modes and saved in memory. The monitor

automatically stores the new setting, then recognizes the new mode just as it does a preset mode. In

addition to the factory preset modes, there are at least 10 user modes that can be entered and

stored.

16 Appendix A Technical Specifications