LSI SAS RAID Host Bus Adapter installation

Step 4—Reassembling the workstation

1. Reinstall the card support, if applicable.

Reinstall the side access panel.

3. Reconnect power to the workstation and all external devices.

4. Restore power to the workstation and all external devices.

Step 5—Loading and setting up driver software

For instructions on loading and setting up the drivers for use with your workstation, see the

manufacturer’s documentation shipped with the RAID controller card.

At the time of component installation, look for device firmware and driver updates, designated for your

workstation model and operating system. Obtain updates from

http://www.hp.com/go/

workstationsupport.

Step 6—Configuring RAID devices

For detailed instruction on configuring RAID devices, see the service guide for your HP workstation

model at

http://www.hp.com/support/workstation_manuals.

Additional information is available at

http://www.hp.com/support/RAID_FAQs.

Japanese 日本語

This document is available in Japanese. See http://www.hp.com/support/workstation_manuals, then

select your workstation product and select Japanese from the drop down Manual Language

menu.

このドキュメントは日本語版が用意されています。

http://www.hp.com/support/

workstation_manuals にアクセスし、ご使用のワークステーション製品を選択し、Manual Language

ドロップダウンメニューから Japanese を選択してください。

10 LSI SAS RAID Host Bus Adapter installation