Intel vPro Processor Technology Setup and Configuration for the HP Z1, Z210, Z420, Z620 and Z820 Workstations

19
Connecting with the Intel AMT WebGUI - SMB Example
1. Power on an AMT system that has completed AMT Setup and Configuration.
2. Execute a web browser from a separate system, such as a Management PC that
is also on the same subnet as the AMT PC.
3. Connect to the IP address specified in the MEBx and port of the AMT system.
-- By default the port is 16992
-- If DHCP was used, then use the Fully Qualified Domain Name (FQDN)
for the ME. The FQDN is the combination of the hostname and domain.
Example A: h t t p : / / 19 2 .16 8 . 0 .1:16 9 9 2 (IPv4 address)
Example B: http://hpsystem.hp.com:16992 (from Step 14)
Example C: http://[2001:ABC::ABC]:16992 (IPv6 address)
4. The Management PC makes a TCP connection to the AMT system and accesses
the top level AMT embedded webpage within the Management Engine of the
AMT system.
5. Enter username and password. The default username is “admin” and the
password is the one set during AMT Setup in the MEBx. After login, the System
Status screen appears (Figure 24).
Figure 24. Intel AMT WEB GUI Screen