HP Z220, Z420, Z620, and Z820 Workstations Microsoft® Windows® XP Installation Reference Guide

6
6. The setup process proceeds with loading files until it reaches the stage where it requires the third-party driver. When setup reaches
the stage where it requires the third-party driver, it provides the following interactive display:
7. Pressing the S key on the keyboard will cause Setup to search drive A for a driver. If there is no disk in the drive, Setup displays a
message asking for the manufacturer-supplied hardware support disk.
8. Insert the floppy disk containing the storage driver and press the Enter key on the keyboard to continue. Setup reads the
information about the floppy disk and displays the available driver choices.
9. Make sure the proper driver is selected and press the Enter key on the keyboard to continue. Setup begins loading the selected
driver. A confirmation of the selected driver will be shown in an interactive display. If additional drivers must be installed, press the S
key on the keyboard, otherwise press the Enter key to continue.