Administrator's Guide

Example A-1 File system mount points
/var/opt/drd/mnts/sysimage_001
/var/opt/drd/mnts/sysimage_001/var
/var/opt/drd/mnts/sysimage_001/usr
/var/opt/drd/mnts/sysimage_001/tmp
/var/opt/drd/mnts/sysimage_001/stand
/var/opt/drd/mnts/sysimage_001/opt
/var/opt/drd/mnts/sysimage_001/home
If the inactive system image was created by the drd clone command, the mount point for the
root file system, chosen automatically by the mount command, is /var/opt/drd/mnts/
sysimage_001. If the currently-booted system was created by the drd clone command, the
mount point of the root file system of the original system (now inactive) is /var/opt/drd/mnts/
sysimage_000.
The drd mount command syntax is:
drd mount [-?] [-p] [-q] [-v][-x extended option=value] [-x -?][-X
option_file]
Options
-?
Displays the usage message for a DRD command. This option cannot be used with other options.
-p
Sets preview mode. When run with the -p option, a DRD command performs analysis without
running the command and reports any errors.
-q
Decreases the verbosity level by one each time it is specified. For example, -qq will reduce
the verbosity from the default value of 4 to 2. If both -x verbosity=5 and -qqq are included
on the command line, the effective verbosity is 2. The minimum verbosity level is 0. (See also
the -x verbosity option.)
-v
Increases the verbosity level by one each time it is specified. For example, -v will increase the
effective verbosity from the default value of 4 to 5. If both -x verbosity=1 and -vv are
included on the command line, the effective verbosity is 3. The maximum verbosity level is 5.
(See also the -x verbosity option.)
-x extended_option=value
Sets the extended option to a value.
-x -?
Displays the list of possible -x (extended) options.
-X option_file
Gets the extended options from a file.
Extended options
The following extended options are available:
-x alternate_bootdisk=block_device_special_file
This is the alternate boot disk. The alternate boot disk must be specified as a block device
special file.
56 DRD commands