Administrator's Guide

Example 4-1 The drd mount command output
# /opt/drd/bin/drd mount
======= 12/08/06 22:19:31 MST BEGIN Mount Inactive System Image (user=root)
(jobid=dlkma1)
* Reading Current System Information
* Locating Inactive System Image
* Mounting Inactive System Image
======= 12/08/06 22:19:52 MST END Mount Inactive System Image succeeded.
(user=root) (jobid=dlkma1)
The drd mount command automatically chooses the mount point for the inactive system image.
If the image was created by the drd clone command, the mount point is /var/opt/drd/mnts/
sysimage_001. If the clone has been booted, drd mount mounts the original system at the
mount point /var/opt/drd/mnts/sysimage_000. To see all mounted file systems, including
those in the active and inactive system images, execute the following command:
# /usr/bin/bdf
The output of this command should look similar to Example 4-2, if the drd mount command has
been executed:
Example 4-2 The bdf command output
# /usr/bin/bdf
file system kbytes used avail %used Mounted on
/dev/vg00/lvol3 1048576 320456 722432 31% /
/dev/vg00/lvol1 505392 43560 411288 10% /stand
/dev/vg00/lvol8 3395584 797064 2580088 24% /var
/dev/vg00/lvol7 4636672 1990752 2625264 43% /usr
/dev/vg00/lvol4 204800 8656 194680 4% /tmp
/dev/vg00/lvol6 3067904 1961048 1098264 64% /opt
/dev/vg00/lvol5 262144 9320 250912 4% /home
/dev/drd00/lvol3 1048576 320504 722392 31% /var/opt/drd/mnts/sysimage_001
/dev/drd00/lvol1 505392 43560 411288 10% /var/opt/drd/mnts/sysimage_001/stand
/dev/drd00/lvol4 204800 8592 194680 4% /var/opt/drd/mnts/sysimage_001/tmp
/dev/drd00/lvol5 262144 9320 250912 4% /var/opt/drd/mnts/sysimage_001/home
/dev/drd00/lvol6 3067904 1962912 1096416 64% /var/opt/drd/mnts/sysimage_001/opt
/dev/drd00/lvol7 4636672 1991336 2624680 43% /var/opt/drd/mnts/sysimage_001/usr
/dev/drd00/lvol8 3395584 788256 2586968 23% /var/opt/drd/mnts/sysimage_001/var
In this output, file systems identified as dev/vg00/* are the active system image file systems.
Those identified as /dev/drd00/* are the inactive system image file systems.
4.2 Performing administrative tasks on the inactive system image
The following examples show some tasks you can perform on the inactive system image.
22 Accessing the inactive system image