Specifications

f.
Keyboard on page 65
g.
Top cover on page 67
To remove the BrightView display assembly:
1. Remove the WLAN cables (1) from under the system board.
2. Disconnect the display panel cable (2) from the system board.
CAUTION: Support the display assembly when removing the following screws. Failure to
support the display assembly might result in damage to the display assembly and other computer
components.
3. Remove the three screws (1) that secure the display assembly to the computer.
4. Remove the BrightView display assembly (2).
78 Chapter 4 Removal and replacement procedures