System information
Table Of Contents
- HP Pavilion dv6 Entertainment PC
- Product description
- External component identification
- Illustrated parts catalog
- Removal and replacement procedures
- Preliminary replacement requirements
- Component replacement procedures
- Service tag
- Computer feet
- Battery
- Webcam/microphone module
- Optical drive
- Memory module
- TV tuner module
- RTC battery
- Hard drive
- WLAN module
- Switch cover and keyboard
- Power button board
- Bluetooth module
- Display assembly
- Speaker
- Top cover
- Modem module
- Audio/infrared board
- USB board
- Power connector cable
- System board
- TV tuner module cable
- Modem module cable
- Fan/heat sink
- Processor
- Setup Utility
- Specifications
- Computer specifications
- 15.6-inch WXGA display specifications
- Hard drive specifications
- Blu-ray ROM DVD±R/RW SuperMulti DL Drive specification
- DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive specifications
- System DMA specifications
- System interrupt specifications
- System I/O address specifications
- System memory map specifications
- Screw listing
- Backup and Recovery
- Connector pin assignments
- Power cord set requirements
- Recycling
- Index
Removal and replacement procedures
Maintenance and Service Guide 4–25
Display assembly
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 4-7).
5. Remove the following components:
a. Disconnect the wireless antenna cables from the WLAN module (see “WLAN module” on page 4-17).
b. Switch cover and keyboard (see “Switch cover and keyboard” on page 4-20).
Remove the display assembly:
1. Disconnect the display panel cable 1 from the system board.
2. Remove the WLAN antenna cables and the microphone cable from the clips 2 built into the top cover.
3. Disconnect the webcam/microphone cable 3 from the system board.
Ä
Support the display assembly when removing the following screws. Failure to support the display assembly can
result in damage to the display assembly and other computer components.
4. Remove the four Phillips PM2.5×6.5 screws 1 that secure the display assembly to the computer.
5. Lift the display assembly 2 straight up and remove it.
Description Spare part number
15.6-inch WXGA BrightView display assembly for use in white computers (includes
webcam, 2 microphones, and 2 wireless antenna transceivers and cables)
578257-001
15.6-inch WXGA BrightView display assembly for use in black computers (includes
webcam, 2 microphones, and 2 wireless antenna transceivers and cables)
578256-001