- Hewlett-Packard Personal Computer User Manual

Remove the power button board (2).

Reverse the above procedure to install the power button board.

Display assembly

Description Spare part number

35.56 cm (14.0-in) WXGA Brightview display assembly for use in models equipped with WWAN 613667-001

35.56 cm (14.0-in) WXGA Brightview display assembly for use in models not equipped with

WWAN

608207-001

Before removing the display assembly, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet

and then unplugging the AC adapter from the computer.

4. Remove the battery (see

Battery on page 45).

5. Disconnect the wireless antenna cables from the WLAN module (see

WLAN module on page 50).

6. Remove the following components:

a. WLAN module (see

WLAN module on page 50)

b. WWAN module (see

WWAN module on page 55)

c. Keyboard (see

Keyboard on page 62)

70 Chapter 4 Removal and replacement procedures