User guide

Secure the full-length expansion board retainer
1
.
Power down the server on page 18
2
. Remove all power:
a
. Disconnect each power cord from the power source.
b
. Disconnect each power cord from the server.
3
. Extend (
Extend the server from the rack on page 19) or remove the server from the rack.
4
.
Remove the access panel on page 20
5. Install a full-length expansion board (Installing a full-length expansion board on page 65).
6
.
Install the PCI riser cage on page 26.
7
. Secure the full-length expansion board retainer.
8
.
Install the access panel on page 20.
9
. Install the server into the rack (
Installing the server into the rack on page 35).
10. Connect each power cord to the server.
11
. Connect each power cord to the power source.
12
.
Power down the server on page 18.
Secure the full-length expansion board retainer 27