Installation Guide

Clean Install on XenServer 55
Block 2
Installation
Reboot XenServer.
Verification
After the XenServer comes up, in addition to the usual verification such as interface status,
management network connectivity etc., perform the following verification checks:
1. Ensure that the bridge corresponding to HPManagedNetwork does not have any PIF
attached to it.
[root@acs-ovs-3 ~]# ovs-vsctl show
016cccd2-9b63-46e1-85d1-f27eb9cf5e90
~Snip~
Bridge "xapi0"
Controller "ctrl1"
target: "tcp:10.10.14.8:6633"
role: slave
fail_mode: standalone
Port "xapi0"
Interface "xapi0"
type: internal
Bridge "xenbr0"
fail_mode: standalone
Port "eth0"
Interface "eth0"
Port "xenbr0"
Interface "xenbr0"
type: internal
Bridge "xenbr2"
~Snip~
2. Ensure that the hpManagedBridge bridges has the 'HP-managed' flag set:
[root@acs-ovs-3 ~]# ovs-vsctl list br xapi0
_uuid : 7572d9d6-3f96-43d5-b820-fd865158057e
controller : [ad89f1f6-fe5f-4e4e-8832-9816176878e8]
datapath_id : "0000000000000001"
datapath_type : ""
external_ids : {}
fail_mode : standalone
flood_vlans : []
flow_tables : {}
mirrors : []
name : "xapi0"
netflow : []
other_config : {datapath-id="0000000000000001", HP-
managed="true"}
ports : [8a9ff6ca-13cd-4036-b9e2-ca6b4e912d11]
sflow : []
status : {}
stp_enable : false
3. Ensure that hp-xenmonitor.py and HP_xenmon.py are running: