Installation Guide

Installing the VRS or VRS-G Software 43

• The Linux server must be a clean installation with a minimum of configuration and

applications.

• An IP address must already have been assigned to the server.

• DNS must have already been configured and must be operational.

• At least two NTP servers must have been configured and NTP must have been synchronized

with them.

• There must be root access to the console of the Linux server.

• You must have the ability to download and install software from remote archives, or have a

local repository mirror for the required repositories.

• The VRS software files must have been copied to the server.

Installing the VRS or VRS-G Software

This section contains:

• VRS on RHEL

• VRS on Ubuntu 12.04 LTS with Ubuntu 12.04 Cloud Packages

• VRS-G on RHEL or Ubuntu 12.04

• Installing the VRS Kernel Module for MPLS over GRE

• Installing VRS Kernel Module On RHEL

• Installing VRS Kernel Module On Ubuntu 12.04

Note: For the currently supported software versions and hardware, consult the release

notes for the current version of HP DCN.

VRS on RHEL

The HP VRS .tar.gz file contains the additional HP-specific packages. Install them following the

process below.

Note: VRSmustbeinstalledfromlocallydownloadedRPMfilesunlessithasbeenadded

toacustomrepository(whichisbeyondthescopeofthisdocument).

Note: SinceCentOS6isacommunityeditionofEnterpriseLinuxwhichisbinary

compatiblewithRHEL,VRSshouldalsoworkonCentOS6.

1. Update your system:

yum update

2. Install dependencies for RHEL:

yum install libvirt

yum install python-twisted