Installation Guide

30 HP VSC Software Installation
Then click Next. A summary is displayed.
11. To close the summary, click Finish.
12. Before powering on the VM, add a serial port. Connect via Network, Network Backing to
Server, Port URI to telnet://:2500 (this can be any port number).
13. Connect to the serial console of the TIMOS VM using a terminal application, such as PuTTY.
14. (Optional) Select one of the three boot options:
• HP VSC
• Update HP VSC configuration and reboot
• Update HP VSC configuration
If you do not make a choice within 20 seconds, the first option—HP VSC— is automatically
selected and the VM boots from the vApp properties that you gave initially.
To boot up the VSC VM implementing the new information, use the second option—Update
HP VSC configuration and reboot.
To make changes inside the VM before booting SROS, use the third option—Update HP
VSC configuration. Instructions for making such changes are beyond the scope of this
document. Do not make such changes unless you know what you are doing.