Installation Guide

20 HP DCN Software Installation
(default=none):
Node 1: myh1.myd.example.com
Node 2: myh2.myd.example.com
Node 3: myh3.myd.example.com
Name Node: myname.myd.example.com
XMPP: xmpp.myd.example.com
Continue [y|n]? (default=y):
y
Starting VSD installation. This may take as long as 20 minutes in some
situations ...
A self-signed certificate has been generated to get you started using VSD.
You may import one from a certificate authority later.
VSD installed on this host and the services have started.
Please install VSD on myh2.myd.example.com to complete the installation.
2. Install HP VSD on Node 2:
[root@myh2 ~]# /media/CDROM/install.sh
-----------------------------------------------------
| V I R T U A L S E R V I C E S D I R E C T O R Y |
| (c) 2014 HP Networks |
-----------------------------------------------------
VSD supports two configurations:
1) HA, consisting of 3 redundant installs of VSD with a cluster name node
server.
2) Standalone, where all services are installed on a single machine.
Is this a redundant (r) or standalone (s) installation [r|s]? (default=s):
r
Is this install the first (1), second (2), third (3) or cluster name node (t)
[1|2|3|t]:
2
Please enter the fully qualified domain name for the 1st node of VSD:
myh1.myd.example.com
Install VSD on the 2nd HA node myh2.myd.example.com ...
Node 2: myh2.myd.example.com
Continue [y|n]? (default=y):
Starting VSD installation. This may take as long as 20 minutes in some
situations ...
A self-signed certificate has been generated to get you started using VSD.
You may import one from a certificate authority later.
VSD installed on this host and the services have started.
3. Follow the interactive script to install VSD on Node 3.
4. Follow the interactive script to install VSD on the Name Node.
5. Verify that your VSD(s) are up and running by using the following command:
service vsd status
Import Certificates on the Servers
On each HP VSD host, installation generates a self-signed certificate. If you want to import an
official certificate signed by a certificate authority, use the
set-cert.sh script:
• Import a certificate generated by a Certificate Authority:
# ./set-cert.sh -r -i certificateFilename
• Generate and use a self-signed certificate if you do not run a proxy:
# ./set-cert.sh -r