Power Supply System/Configuration Specific Instructions

3
Step 9
Tighten the cam lever screws 9A in Figure 1).
Step 10
Re-connect power cord.
Step 11
Monitor the power supply LEDs (A & B in Figure 2).
Green LED (A) indicates that the power supply is functioning. See Table 1 for full details of power supply
LED behaviors.
Figure 2: Power Module LEDs (Upper: Controller Enclosure; Lower: Disk Enclosure)
Table 1: Power Module LEDs Status Indications
A
Power On
LED (Green)
B
Power Fault
LED (Amber)
Indication
Off Off Power module not under power.
On Off Power module under power and operating normally.
Off On Power module fault.
On On Power module fault (rare indication).
* Flashing Host identifying power module.
*Can be on, off, or flashing
A
B
A
B