HP StorageWorks Disk System 2300 User's Guide (This manual also covers the HP Surestore Disk System 2300)

Installation 57
Installation
2. Study the installation overview (see Figure 26)
The following tools are required for the installation of the storage device:
■ Flat-blade screwdriver
■ T25 nut driver
WA RN IN G To ensure cabinet or rack stability and avoid possible injury,
always install storage devices in the rack or cabinet from the
bottom up.
3. Locate a place on the rack columns with the available space required
for the installation of the storage device. The storage device and the
rail kit require 4 EIA units of space, three units for the storage device
and one unit for the rails (see Figure 27).