Manual

Table 3-6 Jetdirect menus (continued)
Menu item Sub-menu item Sub-menu item Values and Description
Ping Test Dest Type Select the destination type for this test.
IPV4 (default)
IPV6
Dest IPv4 Enter the IP address for the IPv4 destination.
Dest IPv6 Enter the IP address for the IPv6 destination.
Packet Size Specify the packet size for this test. Valid values are
64–2048, default is 64.
Timeout Set the timeout value for this test. Valid values are 1–
100, default is 1.
Count Set the count value for this test. Valid values are 0 –
100, default is 4.
Print Results Yes: Print test results.
No (default): Do not print test results.
Execute Yes: Execute the selected tests..
No (default): Do not execute the selected tests.
Ping Results Packets Sent Number of packets sent. Valid values are 0–65535.
Packets Received Number of packets received. Valid values are 0–
65535.
Percent Lost Percent of loss. Valid values are 0–100.
RTT Min Valid values are 0–4096.
RTT Max Valid values are 0–4096.
RTT Average Valid values are 0–4096.
Ping in Progress Yes
No
22 Chapter 3 Administration - Configure the product ENWW