Manual

Table 3-6 Jetdirect menus (continued)
Menu item Sub-menu item Sub-menu item Values and Description
IPSec Specify the IPSec status on the Jetdirect server.
Keep: IPSec or firewall status remains the same as
currently configured.
Disable (default): IPSec or firewall operation on the
Jetdirect server is disabled.
802.1X Reset 802.1X settings to factory defaults.
Reset: Reset 802.1X settings to factory defaults.
Keep (default): Retain current 802.1X settings.
Announcement Agent Set announcement agent preferences.
Enable(default): Enable the announcement agent.
Disable: Disable the announcement agent.
Reset Security Specify whether the current security settings on the
Jetdirect server will be saved or reset to factory
defaults.
Yes: Security settings are reset to factory defaults.
No (default): The current security settings are
maintained.
Diagnostics Embedded Tests LAN HW Test Yes: Run a LAN hardware test.
No (default): Do not run a LAN hardware test.
HTTP Test Yes: Run an HTTP test.
No (default): Do not run an HTTP test.
SNMP Test Yes: Run an SNMP test.
No (default): Do not run an SNMP test.
Data Path Test Yes: Run a data path test.
No (default): Do not run data path test.
Select All Tests Yes: Select all tests.
No (default): Do not select all tests.
Execution Time (H) Set the time delay, in hours, for test execution. When
you click Execute, the selected tests will execute after
this interval. Valid values are 0–24, default is 1.
Execute Yes: Execute the selected tests..
No (default): Do not execute the selected tests.
ENWW
Basic configuration using the Administration menu
21