Basic manual

Label Icon Name and Description
TIP: You can make up to 9 copies using the control panel (varies by model).
6 Check Print Cartridge lights: Indicates the need to reinsert the specified print
cartridge, replace the print cartridge, or close the print cartridge door.
7 Resume: Instructs the HP All-in-One to continue after a problem is solved.
A blinking Resume light next to the Resume button indicates the need to
load paper or clear a paper jam.
8 Cancel: Stops a print, copy, or scan job.
9 On: Turns the HP All-in-One on or off. The On button is lit when the HP All-
in-One is powered on.
Status light overview
Several indicator lights inform you of the status of the HP All-in-One.
Label Description
1 Paper Type lights (for the Paper Type button)
2 Check Print Cartridge lights
3 Resume light
4 On button
The following table describes common situations and explains what the lights mean.
Light status What it means
All lights are off. The HP All-in-One is turned off. Press the On button to turn on the device.
The On light and one of the Paper
Type lights are on.
The HP All-in-One is ready for printing, scanning, or copying.
The On light is blinking. The HP All-in-One is busy printing, scanning, copying, or aligning the
print cartridges.
The On light blinks quickly for 3
seconds and then is on steady.
You pressed a button while the HP All-in-One is already busy printing,
scanning, copying, or aligning the print cartridges.
The On light blinks for 20 seconds
and then is steady.
You pressed the Scan button and there was no response from the
computer.
Chapter 1
(continued)
4 HP All-in-One overview
HP All-in-One overview