User Guide

Page Format
Setting Page Size in the
Front Panel
Image Appearance Print Management
Printer Configuration
Media & InkIntroduction Front Panel Other
Printer
Options
Index
Solutions
Starting to Print a File that is Waiting for a Time-out
If all is in order (paper loaded, all ink components installed, and no file errors), there are still reasons why a file you
have sent from your computer may not start printing when expected:
• The print file may lack a proper file terminator and the printer is therefore waiting for the specified I/O time-out
period before assuming it is complete. See To Change the I/O Time-out Setting
.
• Nesting may be On and the printer is waiting for the specified nest wait time-out period before calculating the
appropriate nests. In this case, the printer display shows the remaining time for the nesting time-out. See How
Long does the Printer Wait for Another File?
• If your file has selected sheet or roll paper for printing the job, but the selected paper is not loaded into the
printer:
– The front panel will prompt you to load the selected paper; once you have loaded the paper the printer will
print the job.
– Press the Cancel key and re-send the job with paper that you have available.
If you want to override the time-out period and start printing, press the
Form Feed and Cut key on the front panel.
Form Feed
and Cut Key