User guide

Advanced capabilities 97
Figure 6-4 Microphone device selection and audio playback device selection on the Sender
Audio
playback
device
selection
Microphone
device
selection
Application
RGS Audio Player
HP Remote Microphone
virtual device
RGS Audio
Recorder
HP Remote Audio
virtual device
audio device
Remote
Computer
(Sender)
If the Remote Computer doesn’t have an audio device
installed, RGS will automatically load the HP Remote
Audio virtual device and make it the default playback
device. However, HP Remote Microphone will also
be displayed in the drop-down menu. Ensure that
HP Remote Audio
(default) is selected, not
HP Remote Microphone.
If the Remote Computer has an audio device
installed, it will be the default playback device.
However, HP Remote Microphone will also
be displayed in the drop-down menu. Ensure
that the audio device
(default) is selected,
not HP Remote Microphone.
If the Remote Computer doesn’t have an audio device
installed, RGS will automatically load the HP Remote
Audio virtual device (as described in Audio Playback
device selection below)--therefore, HP Remote Audio
will be listed in the pull-down menu. To enable remote
microphone, ensure that HP Remote Microphone
(default)
is selected, not HP Remote Audio.
Data path for audio playback
on the Local Computer
If the Remote Computer has an audio device
installed, it will be the default Sound
recording device. To enable RGS remote
microphone, select HP Remote Microphone
instead.
Data path for microphone input
from the Local Computer
Loaded if no
audio device
is installed.
Installed in HP Personal Workstations,
not installed in blade workstations
NOTE: Remote Microphone can be enabled/disabled using the Rgsender.Mic.IsEnabled
property, as described in Section 9-5-3, “Microphone property group.”