User guide

RGS properties 153
blanking is enabled. For details on monitor blanking, see Section 5-1-4, “Remote Computer monitor blanking
operation.”
Rgsender.IsIloRemoteConsoleEnabled=bool (0)
This property is supported only on Linux. If set to 0, the iLO (integrated Lights-Out) console is disabled when an
RGS connection is made. This prevents the user’s desktop session from being visible through the iLo remote
console. When set to one, the user’s desktop session will be viewable through the iLO remote console. The default
is 0—disable viewing of the user’s desktop session through iLO.
Rgsender.IsAnonymousConnectionForceEnabled=bool (0)
By default, Easy Login is only enabled on a blade workstation. To enable Easy Login functionality on a standalone
workstation, this property value can be changed from 0 to 1.
CAUTION: Enabling the above property on a standalone workstation Remote Computer may allow a Local
Computer user unauthorized access to the Remote Computer. If Easy Login is enabled via this property, a Local
Computer user can connect to the logged out or locked desktop of the Remote Computer without providing a
username or password. If a user at the Remote Computer console logs in or unlocks the desktop, the anonymous
Local Computer user will be promoted to a primary user.
This will result in the Remote Computer monitor being blanked, and the Remote Computer input disabled. At this
point, the unauthorized Local Computer user will have full control of the Remote Computer, possibly requiring the
Remote Computer user to cycle power on the computer to regain control.
Rgsender.IsCollaborationNotificationEnabled=bool (1)
Introduced at RGS 5.2.0, this property allows the user to enable or disable display of the collaboration
notification dialog (see Section 5-6-2, “Collaboration notification dialog
”). If set to 1, the collaboration notification
dialog is displayed. If set to 0, the collaboration notification dialog is not displayed. The default value is 1—
display the collaboration notification dialog.
CAUTION: Caution is advised in disabling the collaboration notification dialog because neither the Remote User (if
present) or the Local Users will be notified who is participating in a collaboration session. Furthermore, if display of
the collaboration notification dialog is disabled, the warning dialog in Figure 5-7 (which is displayed when the
Remote Computer is unable to blank its monitor) will also be prevented from being displayed.
8-5-3 Sender microphone property
Rgsender.Mic.IsEnabled=bool (1)
This property is new with RGS 5.1.3, and is only supported on the Windows Sender. If set to 1, remote
microphone is enabled (on/unmuted). If set to 0, remote microphone is disabled (off/muted). The default value is
1—remote microphone is enabled (on/unmuted).