Getting Started Guide

2-11
Detailed Hardware Installation and Initial Setup Steps
Overview
6. Verify connectivity by pinging:
• The DCM Controller’s default gateway
• Your management station
a. Access the main LCD menu.
Press the accept button to access the main menu initially; press the
cancel button to move back a screen.
Figure 2-10. Panel LCD Main Menu
b. Select Ping Test.
Figure 2-11. Panel LCD Menu > Ping Test
c. Set the IP address to which you want to confirm connectivity.
By default, the IP address is set to the DCM Controller’s default
gateway. Press the accept button to ping the default gateway.
To ping a different IP address, use the left and right arrow buttons to
move the cursor from digit to digit. Then use the up and down arrow
buttons to alter the selected digit.
When you are finished, press the accept button.
d. The results of the ping are displayed.
Figure 2-12. Panel LCD Menu > Ping Test > Results
e. Press the left arrow button to return to the main menu.