Reference Guide

Product Notes ↓
(read notes
below)
StoreOnce Backup System "G3" 3.11.1 3.11.0 3.10.1 3.10.0 3.9.4 3.9.2 3.9.0 3.7.0 3.6.5 3.6.2
6500 Backup
B6200
4900 Backup
4700 Backup
4500 Backup
4430 Backup
4420 Backup
4220 Backup
4210 FC Backup
4210 iSCSI Backup
2700 iSCSI Backup
2620 iSCSI Backup
2610 iSCSI Backup
3
StoreOnce VSA (VMware & Hyper-V)
D2D G2 StoreOnce Backup Systems
2.3.0/3.11.1 2.3.0/3.11.0 2.3.0 / 3.9.4 2.3.0 / 3.9.0 2.3.0 / 3.6.5 2.2.18 / 3.6.2 2.2.17 / 3.5.0 2.2.16 / 3.5.0 2.2.14
D2D4324
1
D2D4312
1
D2D4112 G2
1, 2
D2D4106i G2
1
D2D4106fc G2
1, 2
D2D2504 G2
1
D2D2502 G2
1
NOTES:
1)
Search HP Support Center document 'BB852-90947'
2)
3)
4)
StoreOnce Disk Storage Systems
System Software for StoreOnce Backup Systems
4
HP Data Agile BURA Compatibility Matrix - BackUp, Recovery & Archive
Supported browsers (IE9,10,11, Firefox v22+, Firefox ESR 24.x)
Indicates a D2D2502i converted from 2.x to 3.x system software - HP StoreOnce 2610 Backup system is not a shipping product. Please search for the HP StoreOnce 2620 Backup system for supporting
documentation
Follow the configuration instructions in the conversion guide document (see below) before converting any G2 StoreOnce Backup System to the new G3 software.
The older StoreOnce D2D4106fc (EH998A) and D2D4112 (EH993B) running 2.x.x software are not supported for conversion to 3.x.x. Only the newer D2D4106fc (EH998B) & D2D4112 (EH993C) versions are
supported.
Refer to "How to use this Document" on page 2.
Page 5 of 64