HP Compaq Business PC Maintenance and Service Guide Pro 6300 Series Microtower Pro 6300 Series Small Form Factor

7. Replace the four screws in the bottom of the carrier to hold the drive securely in place.
Figure B-6 Replacing the Security Screws
8. Place the thermal sensor on top of the hard drive in a position that does not cover the label (1)
and attach the thermal sensor to the top of the hard drive with the adhesive strip (2).
Figure B-7 Replacing the Thermal Sensor
216 Appendix B Removing and Replacing a Removable 3.5-inch SATA Hard Drive