F10 Setup overview for 2012 HP Business Notebooks and Desktops 2012 Business PC Models Technical white paper

9
Feature
Function
Default Setting,
if applicable
Integrated Camera
Enables integrated camera
Enabled
Power Monitor Circuit
Enables power monitor circuit
Enabled
Audio Device
Enables integrated audio device
Enabled
Modem Device
Enables integrated modem
Enabled
Microphone
Enables integrated microphone
Enabled
Speakers and Headphones
Enables internal speakers and headphone jack
Enabled
Wake unit from sleep when lid is
opened
Opening the lid wakes the computer from Sleep mode
Disabled
Power on unit when lid is opened
Opening the lid powers on the computer
Disabled
mSATA
Enables mSATA support
Enabled
Boost Converter
Draws power from the battery to give the CPU a momentary
performance gain.
Enabled
Backlit keyboard timeout
Allows you to specify the timeout period for the keyboard
backlit LEDs
15 secs
Port Options
Serial Port
Enables integrated serial port
Enabled
Parallel Port
Enables integrated parallel port
Enabled
Flash media reader
Enables integrated media card reader
Enabled
USB Port
Enables integrated USB port
Enabled
1394 Port
Enables integrated 1394 port
Enabled
Express Card Slot
Enables integrated ExpressCard slot
Enabled
Smart Card
Enables integrated smart card slot
Enabled
eSATA Port
Enables integrated eSATA port
Enabled
AMT Options
USB Key Provisioning Support
Allows AMT provisioning using USB Disk-on-key
Disabled
Unconfigure AMT on next boot
Resets AMT configuration options on next boot
Disabled
SOL Terminal Emulation Mode
Specifies terminal emulation mode
ANSI
Firmware Progress Event Support
Enables AMT progress events, which allows remote
monitoring of machine status of client units
Disabled
Initiate Intel CIRA
Enables Intel CIRA feature
Disabled
Set Security Level
Allows administrator to restrict visibility or configurability of
F10 Setup options for standard users
N/A
Restore Security Defaults
Restores the security level of F10 Setup options to default
N/A
BIOS Power-On
Automatically powers system on based on preset schedule.
Shuts down Windows gracefully and ensures feature is on in
F10 Setup
Enables from Windows 7 and Vista "Allow wake timers”;
Power Options -> Advanced settings -> Sleep -> Allow Wake
timers - Plugged in: Enable
Supported ONLY on AC power
Disabled