F10 Setup overview for 2012 HP Business Notebooks and Desktops 2012 Business PC Models Technical white paper

13
Feature
Function
Default Setting, if
applicable
DriveLock Security
Allows configuration of DriveLock Master and User
passwords
N/A
Power Menu
OS Power Management
 Runtime Power Management
Enables Runtime Power Management
Enabled
 Idle Power Savings
Increases OS Idle Power Savings
Extended
 Unique Sleep State Blink Rates
Assigns a unique LED blink pattern to S3, S4
Disabled
Hardware Power Management
 SATA Power Management
Permits the SATA bus to enter low power states when idle
Enabled
 S5 Maximum Power Savings
Minimizes power consumption of system while in S5 state.
Also disables Wake on LAN functionality from S5 state.
Disabled
Thermal
Adjusts minimum fan speed in Idle Mode
0
ADVANCED MENU
Power-On Options
 POST Mode
Selects between fast startup (QuickBoot) or self testing
during power-on
QuickBoot
 POST Messages
Displays messages during Power-On Self Test (POST)
Disabled
 Press the ESC key for Startup Menu
Displays the “Press Esc for startup menu” prompt
Enabled
 Option ROM Prompt
Displays the Option ROM prompt
Enabled
 After Power Loss
Specifies system state after power loss
Off
 POST Delay (in seconds)
Specifies the amount of delay to add during POST
None
 Remote Wakeup Boot Source
Specifies boot device after a remote wakeup event
Remote Server
 Factory Recovery Boot Support
Enables BIOS support for HP Backup and Recovery tools
Disabled
 Bypass F1 Prompt on Configuration
Changes
Allows system to boot without user input after
configuration change (e.g. memory size change
Disabled
BIOS Power-On
Specifies date and time when system automatically wakes
from off
Disabled
Onboard Devices
Adjusts settings for integrated IO ports
Serial Port A
IO=3F8h; IRQ=4
Serial Port B
IO=2F8h; IRQ=3
Bus Options
 PCE SERR# Generation
Enables PCI Device to Generate SERR#
Enabled
 PCI VGA Palette Snooping
Enables VGA Palette Registers Snooping
Disabled
Device Options
 Printer Mode
Specifies parallel port mode
EPP+ECP
 NumLock State at Power-On
Enables NumLock at boot
Off
 Integrated Video
Controls whether or not the integrated video controller is
enabled
Disabled
 Internal Speaker
Controls whether or not the internal speaker is enabled
Enabled
NIC Option ROM Download
Controls whether or not NIC option ROM is downloaded
and executed. Some systems may need to disable this
feature to save NIC Option ROM address space for use by
other devices.
Enabled