User Manual
Table Of Contents
- Product Features
- Setting Up and Using the Monitor
- Installing the Stand
- Rear Components
- Connecting the Cables
- Front Panel Controls
- Adjusting the Monitor
- Turning on the Monitor
- HP Watermark and Image Retention Policy
- Connecting USB Devices
- Removing the Monitor Stand
- Mounting the Monitor
- Locating the Serial Number and Product Number
- Locating the Information Card
- Installing a Cable Lock
- Power Saving Features
- Finding More Information
- Technical Specifications
Entering User Modes
The video controller signal may occasionally call for a mode that is not preset if:
●
You are not using a standard graphics adapter.
●
You are not using a preset mode.
It this occurs, you may need to readjust the parameters of the monitor screen by using the on-screen
display. Your changes can be made to any or all of these modes and saved in memory. The monitor
automatically stores the new setting, then recognizes the new mode just as it does a preset mode. In
addition to the factory preset modes, there are at least 10 user modes that can be entered and
stored.
32 Appendix A Technical Specifications