Owners manual

Scan
●
Scan to a USB drive
●
Scan to a computer
●
Scan to email
●
Scan to a network folder
●
Scan to SharePoint
●
Scan using HP scanning software
●
Scan using other software
●
Scan using Webscan
●
Scan documents as editable text
Scan to a USB drive
1. Load your original print-side down on the scanner glass or print-side up in the automatic document
feeder.
For more information, see Load the scanner or Load the automatic document feeder.
2. Insert a USB device into the USB port on the front of the product.
3. On the control panel, touch the Scan application folder. Then, touch the USB icon.
4.
Touch to select color, size, and resolution options from the Settings menu.
5.
Touch to return to the Scan to USB menu, and select a le type from the Save As list.
6. Touch Filename, and use the keypad to assign a name to the scanned le. Touch Done .
7. Touch Start Scan.
Scan to a computer
Before scanning to a computer, make sure you have already installed the HP recommended printer software.
The printer and computer must be connected and turned on.
In addition, on Windows computers, the printer software must be running before you scan.
NOTE: You can use the HP printer software to scan documents into editable text. For more information, see
Scan documents as editable text.
To set up scan to computer
The scan to a computer feature is enabled by default from the factory. Follow these instructions if the feature
has been disabled, and you want to enable it again.
ENWW Scan 81